top of page
Epobond All purpose

Epobond All purpose

Epobond All purpose structural adhesive is two components adhesive with excellent bonding strength.it it widely used in industries, workshop, household and Do-it-yourself applications.

It is excellent for bonding surfaces exposed to extreme conditions like heat, cold, heavy loads, chemicals, seawater etc.

It bonds metal.ceramic.most plastics, marble, granite, rigid pvc, glass, rubber wood etc.It is not suitable for polyethylene, polypropylene, teflon and silicone rubber.

  • DIRECTIONS FOR USE

    • The surfaces to be treated must be clean, dry and free from dust, oil and grease. For best results, it is recommended to sand the surface before sticking.
    • Mix two equMake sure the surface to be repaired are clean.dry and free of oil grease dust and loose particles. To obtain better results, surface should be roughened with sand paper. Push from syringe amount of resin and hardner required and mix thoroughly till color is uniform. Apply mixture to both surfaces and press together by using clamps, tape, thread or weight Remove excess glue. It sets initially in four to five hours and final strength is achieved after twenty four hours.al quantities from each tube well until the color is homogeneous. Use the mixture within 4 minutes
    •  Put the mixture on the surface to be plastered, when you stick two surfaces together, keep pressing during the gluing process. The mixture takes its final hardness after about an hour
bottom of page