top of page
Epobond fast 401

Epobond fast 401

Epobond fast CX-401 is a very fast curing, medium-low viscosity modified Ethyl Cyanoacrylate adhesive. It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.


    CX-401 is especially formulated for instant bonding of paper, leather, wood, plastics, rubbers, metals and other common substrates. CX-401 will be used in many markets such as assembly of plastic and rubber parts, shoe manufacture and repair, luggage manufacturing, sports equipment manufacture, the electrical and electronic device industry, medical devices, maintenance and repair and many others. Although CX-401 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.


    Bond speed is very fast so ensure that parts are properly aligned before bonding. Activators AX40 may be required if there are gaps or porous surfaces. Some plastics may require application of AP50 Primer. Ensure parts are clean, dry and free from oil and grease. Product is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little cyanoacrylate as possible should be used – over application will result in slow cure speed and lower bond strength. Please contact your Epobond representative for further advice on dispensing solutions.


    Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.

  • Download Manual

bottom of page