top of page
Epobond fast 415

Epobond fast 415

Epobond fast CX-415 Instant Superglue is a medium-high viscosity (1500 cPs) modified Ethyl Cyanoacrylate based adhesive. CX-415 is specially formulated to give enhanced performance when bonding metals to metals or metals to other substrates

  • TYPICAL APPLICATIONS

    Epobond fast CX-415 is specially formulated for the bonding of metals, but can also bond most plastics, rubbers and other common substrates. CX-415 has enhanced gap filling capacity and can be used on parts that do not fit together perfectly. The high viscosity formulation means that the adhesive does not wick into unwanted areas

  • DIRECTIONS FOR USE

    Bond speed is very fast so ensure that parts are properly aligned before bonding. Activators AX 40 may be required if there are gaps or porous surfaces. Some plastics may require application of AP 50. Ensure parts are clean, dry and free from oil and grease. Product is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little cyanoacrylate as possible should be used – over application will result in slow cure speed and lower bond strength. Please contact your Epobond representative for further advice on dispensing solutions.

  • STORAGE

    Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.

  • Download Manual

bottom of page