top of page
Epobond-Lock TL-1243

Epobond-Lock TL-1243

Epobond-Lock TL-1243 Nut-lock is a general purpose, mediumhigh strength, thixotropic anaerobic thread locking compound. The product cures when confined in the absence of air on close-fitting metal surfaces.

  • TYPICAL APPLICATIONS

    Epobond-Lock TL-1243 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. is slightly oil tolerant, so it will bond some ‘as received’ parts, but best results are obtained with clean substrates. The thixotropic nature of the product prevents run off, dripping and migration after assembly. is typically used on mounting bolts, housing screws, etc. will help prevent the corrosion of assembled parts

  • DIRECTIONS FOR USE

    TL-1243 is suitable for medium-high strength retaining applications that require small to medium gap filling.Ensure parts are clean, dry and free from oil and grease. Apply adhesive to all the engaged area. Assemble parts and allow to cure. Wipe excess adhesive from outside of joint. Product is normally hand applied from the bottle or tube. Dispensing systems are available for high volume assembly applications. Please contact your representative for further advice on dispensing solutions.

  • STORAGE

    Optimal storage conditions are between 8˚C and 21˚C .Storage outside this temperature range can adversely affect product properties and affect the stated shelf life

  • Download Manual

bottom of page