top of page
Epobond-Lock TS-1542

Epobond-Lock TS-1542

Epobond-Lock Ts-1542 is a single component, medium strength anaerobic pipe sealant. cures when confined in the absence of air between close-fitting metal surfaces

  • TYPICAL APPLICATIONS

    Epobond-Lock TS-1542 is formulated to lock and seal fine and medium pitch pipe threads, particularly for hydraulic and pneumatic pipe systems, up to ø15mm pipe. TS-1542 prevents vibration loosening and leakage through the pipe threads. TS-1542 is formulated to give medium strength break and prevail torque on assembled joints, thus enabling easier disassembly and servicing. Pipe joints made with TS-1542 should be tightened to the specitied torque within a maximum of 10 minutes from initial assembly. TS-1542 will give an almost instant low pressure seal (up to 2 Bar after 20mins.) and when fully cured will seal up to the bursting pressure of the pipe (e.g. 10,000psi).

  • DIRECTIONS FOR USE

    TS-1542 is suitable for most pipe threads of fine to medium pitch, up to a maximum ø15mm pipe. TS-1542 will not cure outside the joint and is virtually non-fouling in most types of hydraulic systems Ensure parts are clean, dry and free from oil and grease Apply adhesive to all engaged threads. Assemble parts and allow to cure. Wipe excess adhesive from outside of joint. Product is normally hand applied from the bottle. Dispensing systems are available for high volume assembly applications. Please contact your Epobond representative for further advice on dispensing solutions.

  • STORAGE

    Optimal storage conditions are between 8˚C and 21˚C .Storage outside this temperature range can adversely affect product properties and affect the stated shelf life

  • Download Manual

bottom of page